Shopping Cart

WHAT TO USE AND HOW TO USE IT?

Hot Water Heater - Place a Three-Hole Resonator for wired appliances as near to the center of the top of the hot water heater as possible with the white dot to the north for greatest strength.

Household and Office Electronics

For wired appliances which plug into the electrical service. Be careful not to block air vents with resonators on any appliance.

Telephones - Place an Electronic Smog Buster Tab or a Cellular Phone Tab on the back of the receiver.

Computer systems which plug in and do not have a wireless router - Place a Three-Hole Resonator for wired appliances on the case containing the CPU (box with drives) between the unit and the operator. Also, place a Three-Hole Resonator on center top, center side, or center bottom of the monitor case about 1 1/2 inches from the front. If the operator spends many hours in front of the computer, they should also wear a Personal Protective Bead over their chest to help prevent headaches and red eyes.

Fluorescent Lights in Homes - Pace a Three-Hole Resonator for wired appliances on the ballast of the fixture.

Fluorescent Light Banks in Businesses -Place a Tri-Pak Resonator on the end fixture with the long edge toward the bank of fluorescent lights so that the arrow on the label points down the line of fixtures.

Power Breaker Bars - Place a Three-Hole Resonator for wired appliances on the surface of the bar next to the reset switch.

Refrigerators - Place a Three-Hole Resonator for wired appliances on back where the cord enters the refrigerator, particularly if it is against a wall with a baby, or other person's bed, on the other side.

Scanners, Photocopiers, Videos, DVD Players and Speakers - Place a Twelve Point Resonator Tab on the center of the top, bottom or side cabinet of the equipment. The Twelve Point Resonator sends a clearing energy in all directions and may also be used on computer systems and most other sources of electronic radiations.

Severe Sources of Electromagnetic Radiation - For most applications the Resonators mentioned above may be used to spot-fix electrical appliances. For severe sources of annoying radiation a G-33 Resonator should be used.

Wireless and Microwave Devices

Cell Phones - Place a Cellular Phone Tab on the antenna end of the cell phone, or behind the receiver if possible. For ear-plug or head-set cellphones, place the Cellular Phone Tab on the base receiver. If annoyance persists, they can be placed on the back of each ear receiver.

Microwave Cooker - Place a Three-Hole Resonator for wireless appliances on the center top of the case.

Wireless Electronic Router - Place a Three-Hole Resonator on top center, avoiding vents.

Wireless Cellphone Headsets Using Bluetooth - Place a Cellular Phone Tab on the outside of the headset unit.

Wireless Computer Systems Using Bluetooth - Place a Three-Hole Resonator close to the Bluetooth USB connector on your computer.

Wireless Home Security Units - Place a Three-Hole Resonator on top center of unit.

In House Mini-Dish Entertainment Box - Place a Three-Hole Resonator on top center.

Outside Sources of Electromagnetic Radiation

Outside sources of harmful electromagnetic radiation from such things as close by cellphone towers, electricity sub-stations, power lines, and also natural radiations coming up from the ground can cause problems in your home or work environment.

Electricity Sub-Stations & Power Lines - Place a Tri-Pak Resonator on a bookshelf or window sill in your home of office with the long edge facing toward the external source of electrical annoyance. A Clear Field Resonator will also perform the same function, plus a lot more, when placed on a wall on the opposite side of a room facing the source of the unwanted external radiation.

Cellphone Towers, Radio Towers & Radar - Place a Tri-Pak Resonator on a bookshelf or window sill in your home of office with the long edge facing toward the external source of electrical annoyance. A Clear Field Resonator will also perform the same function, plus a lot more, when placed on a wall on the opposite side of a room facing the source of the unwanted external radiation.

Geopathic Stress - Also known as ground radiation. Place a Flat Spiral Resonator under a bed, bead side up, when sleep is disturbed by rising earth energies. Also, a Clear Field Resonator can be used to clear all ground radiation problems on an entire floor of a building. Place it on a wall anywhere in the building on the same level as the floor you are trying to clear. This Resonator will also clear all of the floors above the floor on which it is placed.

Transportation

Automobiles - Place a Tri-Pak Resonator in the glove box of your car aimed toward the electronics of your engine.

18 Wheelers - Place a Flat Spiral Resonator under the driver's seat, clear side up.

Trains - Place a G-33 Resonator on the electric motor.

Commercial Aircraft - When you arrive at the airport, you can place the Tri-Pak Resonator from your car glove box in your carry-on, long side down, arrow on label pointing down. Place the carry-on in the over head bin, or under the seat in front of you. Most of the wiring of the aircraft runs under the floor beneath you. This placement of the Tri-Pak Resonator will help protect you from jet lag. (You may want to include any papers that explain what the Tri-Pak is in your carry-on, in case the security people are curious, and to prevent them from dismantling your Tri-Pak!!)

Other Adverse Influences

Angry Thoughts, Mind Control, Violence, Bad Vibes and HAARP - Use one of the Star Resonators. These powerful radionic devices absorb harmful energies, and then projects them back out as a beneficial calming and non-violent energy. Carry one on your person or in your purse.